Super energy-saving: Half running cost

Super energy-saving: Half running cost

The new TurboSilence Technology is optimized on the basis of Full-inverter Technology, the whole control system and corresponding components are upgraded, it can instantly increase heating capacity by 20%, but with silent running.

Averagely more than 10 Times Quieter

Averagely more than 10 Times Quieter

All TS INVERTER models are with twin-rotary compressor to minimize vibration.
Running by AVERAGE 50% capacity to maintain pool temperature for whole swimming season, which means 10 times quieter swimming environment & friendly neighborhood.

Double Energy Saving

Double Energy Saving

Average COP 11.3 at 50% capacity, COP up to 16 (Air 26°C/Water 26°C/Humidity 80%) Half running cost

Description

Description

“Online” chlorinators with a monoblock body that produce chlorine from salt by electrolysis, providing salt concentration in the pool water in the same proportion as the salinity of the tears.

Technical characteristics

Technical characteristics

The device has the contains/is capable of:

• Self-cleaning titanium electrode;
• Digital screen;
• Recording the water temperature value;
• Registration of the percentage rate of work;
• Record of total working hours;
• Automatic polarity adjustment between 1-8 hours according to water hardness level.

Information

Information

Chlorinator with chlorine production between 10gr/h to 30gr/h. Capacitated for pools of volume between 50 to 170 m³. Easy assembly.

Description

Description

Saltwater chlorinators that produce chlorine by electrolysis of pool water with teardrop salinity.

Technical characteristics

Technical characteristics

The device has:

• electrodes made of titanium with a useful life of 14,000 h;
• a standard cleaning cycle process (changing polarity);
• a numeric display shows the percentage of work and the current value in amps and totals the hours of work.

Information

Information

Chlorinator with chlorine production between 10gr/h to 30gr/h. Capacitated for pools of volume between 50 to 170 m3. Easy assembly.

Description

Description

Saltwater chlorinators that produce chlorine by electrolysis of pool water with teardrop salinity

Technical characteristics

Technical characteristics

In addition to the specifications mentioned in the Puritron Standard product, the necessary software and hardware are already installed, which allows for automatic pH control. The device is installed in a panel complete with pH electrodes, electrode flow cell and 2 l/h dosing pump.

Information

Information

Chlorinator with chlorine production between 10gr/h to 30gr/h. Capacitated for pools of volume between 50 to 170 m3. 

Description

Description

Designed for semi-commercial swimming pools.

Technical characteristics

Technical characteristics

The SWITCH MODE power supply with insulation class IP67.Completely protected in corrosive and humid conditions thanks to the absence of forced ventilation.Isolated electronics.Compact bipolar cell. Titanium electrodes with a life span of 16,000 hours and they are self-cleaning. The epoxy-based painted galvanized body.Electronic current control and with flow switch.

Information

Information

Digital control and LCD display system Software and hardware for automatic pH control. (optional).Chlorinator with chlorine production between 50gr/h to 150gr/h. Capacitated for pools of volume between 150 to 350 m

Description

Description

Designed for commercial and public swimming pools. High performance chlorinators for intensive commercial use in public swimming pools.

Technical characteristics

Technical characteristics

The SWITCH MODE power supply with insulation class IP67. Completely protected in corrosive and humid conditions thanks to the absence of forced ventilation. Isolated electronics. The most efficient and affordable, low maintenance compact bipolar cell. The life span of titanium electrodes is 16,000 hours and they are self-cleaning. Epoxy-based painted galvanized body.

Information

Information

Software and hardware for automatic pH control. (optional), optional Wi-Fi connection. Chlorinator with chlorine production between 250gr/h to 1000gr/h.

Description

Description

A new series of UV-C equipment, branded and designed for Pool professionals only!

Technical characteristics

Technical characteristics

The Buster UV-C is made of 316L stainless steel. These units are equipped with interchangeable supports for easy installation horizontally and vertically, equipped with a flow switch to turn of the lamp at insufficient water flow. The housing of the Buster UV-C is made of 316L stainless steel, this makes these units suitable for use with a chlorinated pool and saltwater electrolysis pools as well.

Information

Information

The Xpert Series Buster contains 3 new models (80W, 140W amalgam and 420W amalgam), available in different wattages.  The UV-C units are equipped with a practical and professionally designed Timer box with integrated ballast and LED-timer which accurately monitors and visualizes the lamplife.

Description

Description

A new series of UV-C equipment, branded and designed for Pool professionals only!

Technical characteristics

Technical characteristics

The Duplex UV-C is made of Duplex stainless steel. Equipped with two inlets for easy installation; equipped with a flow switch to turn of the lamp at insufficient water flow; visual lamp indicator in lamphead.The unit is suitable for all kinds of swimming pools. Not only regular pools but also chlorinated and saltwater (electrolysis) pools as well.

Information

Information

The Xpert Series Duplex UV-C contains 2 new models (80W and 140W amalgam), available in different wattages. The UV-C units are equipped with a practical and professionally designed Timer box with integrated ballast and LED-timer which accurately monitors and visualizes the lamplife.

Description

Description

The combination of ozone and UV-C, integrated in this smart designed disinfection system, ensures fresh and healthy pool water with the possibility of providing a minimum use of chlorine. 

Technical characteristics

Technical characteristics

Provides triple disinfection: ozone, OH radicals and UV-C. When ozone is used in combination with UV-C light in water, hydroxyl radicals (•OH) are created. These radicals are very effective in oxidizing micropolutants in the water and therefore reducing the organic and inorganic pollution in the water. Also, chlorine disinfection by-products such as THM and chloramines are being reduced.

Information

Information

Inside the UV-C housing, any residual ozone will be converted into OH radicals (the so-called Advanced Oxidation Process) that have an even stronger oxidising power than ozone. The expected lifespan of the lamp regarding UV-C is 9000 hours. When you replace the lamp (for example) in March there will be enough ozone-production for the whole season (for example March to September) and there will be enough UV-C radiation for a whole year. 

Description

Description

With Inox UV-C your swimming pool water will be disinfected efficiently and safely and the quality of your water will remain excellent.

Technical characteristics

Technical characteristics

The Blue Lagoon Inox UV-C has a built-in high-frequency electronic ballast, which absorbs current fluctuations, thereby protecting the lamp. The housing of the Inox UV-C is completely made of 316L stainless steel and is the driving disinfection force for (high-end) pools.

Information

Information

The UV-C radiation inactivates bacteria, viruses and other microorganisms and stops them from multiplying. This device is able to reduce chlorine concentration up to 50-80%! The Inox UV-C comes in two models 75W and 130W.

Description

Description

With Timer UV-C your swimming pool water will be disinfected efficiently and safely and the quality of your water will remain excellent.

Technical characteristics

Technical characteristics

The Timer UV-C has a built in high-frequency electronic ballast. In addition, the device contains an integrated timer that accurately monitors the number of operating hours. You can therefore see exactly when the lamp must be replaced.

Information

Information

The UV-C radiation inactivates bacteria, viruses and other microorganisms and stops them from multiplying. This device is able to reduce the chlorine concentration up to 50-80%! The Timer UV-C comes in three models 40W, 75W and 130W.

Description

Description

The Saltwater Timer UV-C is especially developed for saltwater and seawater pools (salt electrolysis).

Technical characteristics

Technical characteristics

Thanks to the special white PVC housing the salt has no corrosive influence. In addition, the device contains an integrated timer that accurately monitors the number of operating hours. You can therefore see exactly when the lamp must be replaced.

Information

Information

With the Blue Lagoon Saltwater Timer UV-C you can disinfect your water in an efficient and save way. The result is an excellent water quality. The connection at the bottom allows 360° connection flexibility. This is ideal for corner installations or for combination with other lamps.The Saltwater Timer UV-C comes in two models 40W and 75W.

Description

Description

With the Signal UV-C your swimming pool water will be disinfected efficiently, safely and the quality of your water will remain excellent.

Technical characteristics

Technical characteristics

The Signal UV-C has a built in high-frequency electronic ballast. In addition, the device contains an integrated timer that accurately monitors and visualises the hours by changing colour! A warning will be given by a blinking LED when the lamp needs to be replaced. 

Information

Information

The UV-C radiation inactivates bacteria, viruses and other microorganisms and stops them from multiplying. This device is able to reduce the chlorine concentration up to 50-80%!  The Signal UV-C comes with three models 40W, 75W and 130W

Description

Description

This revolutionary combination of UV-C and copper electrolysis means you can have a chlorine-free pool! 

Technical characteristics

Technical characteristics

Other ionizer systems dose approximately 2 ppm copper in your pool water. With Copper Ionizer UV-C, a dose of 0,7 ppm will be enough to fully and safely disinfect your pool. This device is able to reduce the chlorine concentration up to 100%! Max. copper: 0,7 ppm. Connections: Ø63mm / 50mm / 1½". 

Information

Information

With the Copper Ionizer UV-C you have to test your pool water once every two weeks. You only need to test your water values with the supplied test strips and, if necessary, adjust the device to the correct level. The Copper Ionizer comes in two models 40W and 75W.

Description

Description

The VGE Pro product range has low pressure and medium pressure UV lamp based systems. In terms of low pressure we have VGE Pro HDPE.

Technical characteristics

Technical characteristics

The high quality HDPE reactors of VGE Pro HDPE series have been designed to treat highly corrosive water. Besides that, HDPE is resistant to aggressive UV radiation.

Information

Information

They are suited for all kinds of disinfection and UV-C treatment applications and can even be used for the production of ultrapure water, semiconductor-, pharmaceutical- and cosmetic industry.

Description

Description

The VGE Pro product range has low pressure and medium pressure UV lamp based systems. This is the Medium Pressure model.

Technical characteristics

Technical characteristics

The medium pressure UV lamps emits a wide spectrum of Ultraviolet (UV) light which not only gives very good disinfection results but is also excellent for photolysis applications like the reduction of chloramine in pool applications. The single ended lamp in combination with the S.B.T. (Single-end Bayonet Technology) and the on-chamber visual lamp status indication makes the systems extremely user friendly.

Information

Information

The lamp base is equipped with a bayonet technology closure. The lamp itself is single-ended which not only makes it easy to install and replace but also requires service space at only one side of the irradiation chamber.We offer four different systems with medium pressure UV lamps: MultiMax, 600-85 Compact, 600-85 Comfort and the 1200-85.

Aplications

Aplications

Self-priming electric pump for swimming pools, with a large built-in pre-filter, which together with the excellent hydraulic characteristics produces a very high filtration capacity. Filter with transparent polycarbonate cover that allows you to easily observe the interior of the pre-filter basket. Impossibility of electrical communication with water, as no part of the engine comes into contact with water.

Construction Characteristics

Construction Characteristics

Pump body, pump body cover, polypropylene diffuser, resistant to pool chemicals and reinforced with fiberglass to ensure excellent durability. Stainless steel shaft AISl-316. Noryl turbine. Aluminum support base. Mechanical closing in carbon-ceramic and AISI 316 Stainless Steel. Screws in AISI 304 Stainless Steel Asynchronous motor, closed with external ventilation. IP-55 degree of protection. 50 Hz (on request 60 Hz). Class F insulation. Permanently lubricated motor bearings selected to ensure long life and noiselessness. Maximum water temperature: +40°C.

Technical Characteristics

Technical Characteristics

Suction and impulsion connection

• 1 ½” internal thread
• PVC tube 50 paste

• 1/4 HP
• 1/3 HP
• 1/2 HP
• 3/4 HP
• 1 HP

Aplications

Aplications

Self-priming electric pumps for swimming pools, with a large built-in pre-filter, which together with the excellent hydraulic characteristics produces a very high filtration capacity. Filter with transparent polycarbonate cover that allows you to easily observe the interior of the pre-filter basket. Impossibility of electrical communication with water, as no part of the engine comes into contact with water. A key is included as standard for effortless opening of the pre-filter cover.

Construction Characteristics

Construction Characteristics

Pump body, pump body cover, diffuser and opening key made of polypropylene, resistant to swimming pool chemicals and reinforced with fiberglass to ensure excellent durability. Noryl turbine. Stainless steel shaft AISl-316. AIS/-316 stainless steel mechanical lock. AIS/304 stainless steel screws. AIS/304 stainless steel screwsAsynchronous motor, closed with external ventilation. IP-55 degree of protection. 50-60 Hz. Class F insulation. Permanently lubricated motor bearings selected to ensure long life and noiselessness. Maximum water temperature: +40ºC.

Technical Characteristics

Technical Characteristics

Suction and impulsion connection

• 2" internal thread
• PVC tube 63.

• 1/2 HP
• 3/4HP
• 1 HP
• 1 HP 1/2
• 2 HP
• 3 HP

Aplications

Aplications

Self-priming electric pump for swimming pools, with built-in pre-filter of large dimensions, which together with the excellent hydraulic characteristics produces a very high filtration capacity. It has a speed variator, with capacity for 3 speeds. Filter with transparent polycarbonate cover that allows you to easily observe the interior of the pre-filter basket. Impossibility of electrical communication with water, as no part of the engine comes into contact with water.

Construction Characteristics

Construction Characteristics

Pump body, pump body cover, diffuser and opening key made of polypropylene, resistant to swimming pool chemicals and reinforced with fiberglass to ensure excellent durability. Noryl turbine. Stainless steel shaft AISl-316. AIS/-316 stainless steel mechanical lock. AIS/304 stainless steel screws. AIS/304 stainless steel screwsAsynchronous motor of 1.5HP, closed with external ventilation. With variable speed drive [e]JOY with 3 configurable speeds and up to 4 daily cycles. Up to 65% energy savings. IP-55 degree of protection. 50-60 Hz. Class F insulation. Permanently lubricated motor bearings selected to ensure long life and noiselessness. Maximum water temperature: +40ºC.

Technical Characteristics

Technical Characteristics

Suction and impulsion connection

• 1 ½” internal thread
• PVC tube 50.

Aplications

Aplications

Self-priming electric pump for swimming pools, with built-in pre-filter of large dimensions, which together with the excellent hydraulic characteristics produces a very high filtration capacity. It has a specific speed variator, with automatic speeds to save energy. Filter with transparent polycarbonate cover that allows you to easily observe the interior of the pre-filter basket. Impossibility of electrical communication with water, as no part of the engine comes into contact with water.

Construction Characteristics

Construction Characteristics

Pump body, pump body cover, diffuser and opening key made of polypropylene, resistant to swimming pool chemicals and reinforced with fiberglass to ensure excellent durability. Noryl turbine. Stainless steel shaft AISl-316. AIS/-316 stainless steel mechanical lock. AIS/304 stainless steel screws. AIS/304 stainless steel screws3HP high efficiency permanent magnet motor, closed with external ventilation. With specific speed variator with configurable speeds and up to 4 daily cycles. Up to 65% energy savings. IP-55 degree of protection. 50-60 Hz. Class F insulation. Permanently lubricated motor bearings selected to ensure long life and noiselessness. Maximum water temperature: +40ºC.

Technical Characteristics

Technical Characteristics

Suction and impulsion connection

• 1 ½” internal thread
• PVC tube 50.

Aplications

Aplications

Self-priming electric pump for swimming pools, with a large built-in pre-filter, which together with the excellent hydraulic characteristics produces a very high filtration capacity. Filter with transparent polycarbonate cover that allows you to easily observe the interior of the pre-filter basket. Impossibility of electrical communication with water, as no part of the engine comes into contact with water.

Construction Characteristics

Construction Characteristics

Pump body, resistant to pool chemicals and reinforced with fiberglass to ensure excellent durability. Noryl turbine. Stainless steel shaft AISl-316. AIS/-316 stainless steel mechanical lock. AIS/304 stainless steel screws. AIS/304 stainless steel screwsAsynchronous motor, closed with external ventilation. Up to 65% energy savings. IP-55 degree of protection. 50-60 Hz. Class F insulation. Permanently lubricated motor bearings selected to ensure long life and noiselessness. Maximum water temperature: +40ºC.

Technical Characteristics

Technical Characteristics

Suction and impulsion connection

• 3" internal thread
• PVC tube 90.

• 300
• 400
• 550

Aplications

Aplications

Self-priming electric pump for swimming pools, extremely silent, as it rotates at 1,450 rpm up to 10CV, with a large built-in pre-filter, which together with the excellent hydraulic characteristics produces a very high filtration capacity. Filter with transparent polycarbonate cover that allows you to easily observe the interior of the pre-filter basket. Impossibility of electrical communication with water, as no part of the engine comes into contact with water.

Construction Characteristics

Construction Characteristics

Pump body, resistant to pool chemicals and reinforced with fiberglass to ensure excellent durability. Noryl or bronze turbine depending on preference. Stainless steel shaft AISl-316. AIS/-316 stainless steel mechanical lock. AIS/304 stainless steel screws. AIS/304 stainless steel screwsAsynchronous motor, closed with external ventilation. Up to 65% energy savings. IP-55 degree of protection. 50-60 Hz. Class F insulation. Permanently lubricated motor bearings selected to ensure long life and noiselessness. Maximum water temperature: +40ºC.

Technical Characteristics

Technical Characteristics

Flange connections 110mm (4”)
Models

• 250
• 300
• 400
• 550
• 550 Bronze
• 750
• 750 Bronze
• 1000
• 1000 Bronze
• 1250 Bronze
• 1500 Bronze

Aplications

Aplications

Electric pump for counter-current swimming for pools. Ideal for swimming systems. Impossibility of electrical communication with water, as no part of the engine comes into contact with water. It can work with salt water thanks to its mechanical seal in AISI-316 stainless steel.

Construction Characteristics

Construction Characteristics

Pump body, resistant to pool chemicals and reinforced with fiberglass to ensure excellent durability. Noryl turbine. Stainless steel shaft AISl-316. AIS/-316 stainless steel mechanical lock. AIS/304 stainless steel screws. AIS/304 stainless steel screwsAsynchronous motor, closed with external ventilation. Up to 65% energy savings. IP-55 degree of protection. 50-60 Hz. Class F insulation. Permanently lubricated motor bearings selected to ensure long life and noiselessness. Maximum water temperature: +40ºC.

Technical Characteristics

Technical Characteristics

Suction and impulsion connection

• 3" internal thread
• PVC tube 90.

• 300
• 400
• 550

Aplications

Aplications

Electric counter-current pump for swimming pools, extremely silent, as it rotates at 1,450 rpm up to 10hp. Centrifugal pump which, thanks to the large flow it generates at low pressures, makes it suitable for many types of installations, such as refrigeration, transfer, etc. Impossibility of electrical communication with the water, as no part of the motor has contact with the pumped liquid.

Construction Characteristics

Construction Characteristics

Pump body, resistant to pool chemicals and reinforced with fiberglass to ensure excellent durability. Noryl or bronze turbine depending on preference. Stainless steel shaft AISl-316. AIS/-316 stainless steel mechanical lock. AIS/304 stainless steel screws. AIS/304 stainless steel screwsAsynchronous motor, closed with external ventilation. Up to 65% energy savings. IP-55 degree of protection. 50-60 Hz. Class F insulation. Permanently lubricated motor bearings selected to ensure long life and noiselessness. Maximum water temperature: +40ºC.

Technical Characteristics

Technical Characteristics

Flange connections 110mm (4”)
Models

• 250
• 300
• 400
• 550
• 550 Bronze
• 750
• 750 Bronze
• 1000
• 1000 Bronze
• 1250 Bronze
• 1500 Bronze

Aplications

Aplications

Self-priming, thermoplastic body Monoblock Pool Pump; complete with pre-filter. Up to 1 1/2 HP, Suction 1 1/2”-. Discharge 2”; bigger sizes both 2”. Connections are with unions. Easy opening lid with 40° turninig. “Xylex” lid option against aggressive chemicals. Larger basket. 2850 rpm - IP 55 Motor. Pump shaft in AISI 316 quality stainless steel.

Construction Characteristics

Construction Characteristics

Two piece pump body, resistant to pool chemicals and 30% reinforced with fiberglass to ensure excellent durability. Noryl turbine. Stainless steel shaft AISl-316. Mechanical lock in AIS/-316 stainless steel. Screws in Stainless Steel AIS/ 304. Screws in Stainless Steel AIS/ 304. Asynchronous motor, closed external ventilation. IP-55 degree of protection.

Technical Characteristics

Technical Characteristics

Suction and impulsion connection

• 2" internal thread

• ¾ HP M
• 1 HP M
• 1 HP T
• 1.5 HP M
• 1.5 HP T
• 2 HP M
• 2 HP T
• 3 HP T

Technical characteristics

Technical characteristics

Models:

• 5"
• 5"-6"
• 6"
• 8"

Technical characteristics

Technical characteristics

Models:

• 4"
• 5"
• 6"

Technical characteristics

Technical characteristics

Models:4"5"5"-6"6"8" (65L model only)

Aplications

Aplications

ABS plastic filter with pressure gauge and side mounted multi-port valve. OPTIONAL BATTERY LIGHTING TOUCHPAD BUTTON for viewing inside the filter.

Construction Characteristics

Construction Characteristics

Filter shell made of smooth ABS plastic which decreases algea and bacteria cling. Complete with easy opening threaded, large and transparent lid (diameter is 2cm larger than bolted lid).

Technical Characteristics

Technical Characteristics

Filter Diameter 450mm to 630mm. 1"1/2 Side Multiport ValveFilter Diameter 710mm to 900mm. 2" Side Multiport ValveMaximum Working Pressure 2,5 kg/cm². Test Pressure 4 kg/cm². Filtration Rate 50 m³/h/m².

Aplications

Aplications

Swimming pool water filtration equipment. The filter bed can be sand or glass. Multivia Side Valve Included.

Construction Characteristics

Construction Characteristics

Filter shell made of fiberglass reinforced laminated polyester, including pressure gauge, side mounted multiport valve and air purge.

Technical Characteristics

Technical Characteristics

Filter Diameter 450mm to 630mm. 1 1/2" Side Multiport ValveFilter Diameter 710mm to 900mm. 2" Side Multiport ValveTest pressure 3,5 kg/cm². Max. operation pressure 2,5 kg/cm². Filtration rate: 50 m³ /h / m².

Aplications

Aplications

Pool water filtration equipment. The filtered bed can be sand or glass. Side mounted multiport Valve included.

Construction Characteristics

Construction Characteristics

PE Injected FilterThe upper and lower parts are combined with a special welding technique.As the bed depth is greater than in other filter designs, the quality of filtration is considerably higher.Easy-to-open transparent screw cap (2 cm wider than screw cap).Complete with multi-port valve, accessories and pressure gauge.

Technical Characteristics

Technical Characteristics

Filter diameter 500mm and 600mm. 1"1/2 Side Multivia ValveTest pressure 3kg/cm²Maximum operating pressure 2 kg/cm²Maximum filtration rate 50 m³/h/m²

Aplications

Aplications

Swimming pool water filtration equipment. The filter bed can be sand or glass. Multivia Side Valve Included.

Construction Characteristics

Construction Characteristics

Made of PE plastic; complete with pressure gauge and side mounted multiport valve.

Technical Characteristics

Technical Characteristics

Filter Diameter 300mm to 500mm. Side Multiport ValveMax. operation pressure 2,0 kg/cm². Filtration rate: 50 m³/h/m²

Aplications

Aplications

Swimming pool water filtration equipment. The filter bed can be sand or glass. Multivia Top Valve Included.

Construction Characteristics

Construction Characteristics

Made of PE plastic; complete with pressure gauge and top mounted multiport valve.

Technical Characteristics

Technical Characteristics

Filter Diameter 300mm to 500mm. Top Multiport ValveMax. operation pressure 2,0 kg/cm². Filtration rate: 50 m³/h/m²

Aplications

Aplications

Filtration Kit for Swimming pools, pool pump included. The filter bed can be sand or glass. Multivia Top Valve Included.

Construction Characteristics

Construction Characteristics

PE plastic body filter assembled on a plastic base and installed with a pool pump; complete with top mounted multiport valve and interconnection piping between the pump and the filter are both included.

Technical Characteristics

Technical Characteristics

Filter Diameter 300mm to 500mm. Top Multiport Valve

Aplications

Aplications

Filtration Kit for Swimming pools, pool pump included. The filter bed can be sand or glass. Multivia Side Valve Included.

Construction Characteristics

Construction Characteristics

PE plastic body filter assembled on a plastic base and installed with a pool pump; complete with side mounted multiport valve and interconnection piping between the pump and the filter are both included.

Technical Characteristics

Technical Characteristics

Filter Diameter 300mm to 500mm. Side Multiport Valve

Aplications

Aplications

Swimming pool water filtration equipment. The filtered bed can be sand or glass.

Construction Characteristics

Construction Characteristics

Filter shell made of FR Polyester and reinforced by fiberglass bobbin winding outside. Complete with pressure gauge, air release 1/2”. 

Technical Characteristics

Technical Characteristics

Filter Diameter 1200mm to 2500mm.Test pressure 4.0 kg/cm². Max. Operation pressure 2.5 kg/cm².Filtration rate: 50 m³/h/m².Filtration bed depth:1.0 m

Aplications

Aplications

Swimming pool water filtration equipment. The filter bed can be sand or glass.

Construction Characteristics

Construction Characteristics

Filter shell made of fiberglass reinforced laminated polyester by fiberglass bobbin winding outside. Including pressure gauge and air purge.

Technical Characteristics

Technical Characteristics

Filter Diameter 900mm to 2500mm.Test pressure 3.5 kg/cm². Max. Operation pressure 2.5 kg/cm².Filtration rate: 40 m³/h/m².Filtration bed depth: 1.2 m

Aplications

Aplications

The system is designed with five valve group to fulfill all functions of filtration, backwashing, rinse, recirculation and draining.

Construction Characteristics

Construction Characteristics

PVC Valve Batteries with 5 pieces of Ball Valves complete mounted including pipe support pivots with arm clamps and anchoring system, all made in zinc-plated steel. 

Technical Characteristics

Technical Characteristics

Diameter from 75mm to 110mm Ball. Diameter from 110mm to 225mm Butterfly

Aplications

Aplications

Manual multiport valve, six-way valve used to fulfill different functions in the hydraulic circuit: backwashing, filtration, emptying, shut off, rinsing, and circulation of the filter

Construction Characteristics

Construction Characteristics

The design and material selection of the different multiport valve parts are based on minimum friction and resistance, as well as maximum strength and water quality. Body, cover and handle are made of ABS, rotation disc in polypropylene, gaskets in EPDM and metallic components in S.S.

Technical Characteristics

Technical Characteristics

Models:

• 1 1/2” Threaded connections
• Ø 50 mm Slip connections

Aplications

Aplications

Manual multiport valve, six-way valve used to fulfill different functions in the hydraulic circuit: backwashing, filtration, emptying, shut off, rinsing, and circulation of the filter.

Construction Characteristics

Construction Characteristics

The design and material selection of the different multiport valve parts are based on minimum friction and resistance, as well as maximum strength and water quality. Body, cover and handle are made of ABS, rotation disc in polypropylene, gaskets in EPDM and metallic components in S.S.

Technical Characteristics

Technical Characteristics

Models:

• 1 1/2” Threaded connections
• Ø 50 mm Slip connections
• 1 1/2” Threaded Connection Clamps
• Ø 50 mm Clamp Slip Connection

Description

Description

Liquid solution, designed to stabilize the pH of your pool. With this product, the user will be able to adjust the pH of his pool when it is lower than the ideal pH 7.2. SPC Pro pH + Liquid is a product specially formulated for dosing in swimming pool waters that have automatic pH regulation and control equipment.

Utilization

Utilization

To obtain the desired effect, you only need 1 kg of product for every 100 m³ of water, which will result in a pH increase of 0.2.

Composition

Composition

Sodium hydroxide

Description

Description

Solid compound, developed to increase the pH values of your pool. When these are below 7.0.

Utilization

Utilization

To increase the pH of the water by 0.2 units, 1 kg of product must be dosed for every 100 m³ of water. It is convenient to previously dissolve the product in water and then distribute it evenly throughout the pool. Without the presence of swimmers in the pool, pour the necessary dose into a container with water, adding this solution on the surface of the pool evenly.

Composition

Composition

Sodium carbonate.

Description

Description

Specialized liquid solution to lower pH in water treatment. This solution is especially suitable for automatic injection systems, although it can also be applied manually.

Utilization

Utilization

It is recommended to apply the product through automatic system dosing.

Composition

Composition

Sulfuric Acid

Description

Description

Specialized sulfuric acid liquid solution to lower pH in water treatment. Especially suitable for automatic injection systems, but can also be applied manually.

Utilization

Utilization

The use of dosing via an automatic system is recommended. Add 1.2L of product to decrease the pH by 0.2 for every 100 m³ of water.

Composition

Composition

Sulfuric Acid

Description

Description

Specialized solid compound to lower the pH, for water treatment purposes, of your pool.

Utilization

Utilization

Without the presence of swimmers in the pool, pour the necessary dose into a container with water, adding this solution on the surface of the pool evenly. Add 1.0 kg to decrease the pH of 100 m³ of water by 0.2 units.

Composition

Composition

Sodium hydrogen sulfate

Description

Description

Liquid solution of hydrochloric acid (strong acid) with diverse uses such as water treatment, swimming pool, waste water and in the Organic Chemical Industry.

Utilization

Utilization

It is recommended to apply the product through automatic system dosing.

Composition

Composition

Hydrochloric acid

Description

Description

Solid compound, in powder form to increase the total alkalinity of the pool water, when it is lower than 125ppm. It is essential for optimal water treatment, preventing pH imbalance from occurring.

Utilization

Utilization

In the absence of swimmers in the pool, pour the necessary dose of product into a container with water, adding it to the surface evenly. Place 1.8 kg of the product in order to increase the alkalinity of 100 m³ of water by 10 ppm. The total alkalinity of the water should be between 125 - 150 ppm (CaCO₃).

Composition

Composition

Sodium bicarbonate

Description

Description

Liquid solution, product indicated to prevent the formation of incrustations in the water of the swimming pools.

Utilization

Utilization

In the absence of swimmers in the pool, add the product over the impulsion inlets with the filtration equipment in operation. In the initial treatment, it will be necessary to apply 60 mL of the product per m³ of water. In the periodic treatment, only 25 mL per m³ of water should be added.

Composition

Composition

Silicic acid, sodium hydroxide

Description

Description

Liquid solution, effective product in the sequestration of metals (copper, calcium, iron and manganese). Prevents its deposition and encrustation on the walls and elements belonging to the pool in direct contact with the water. Eliminates the coloring of the pool water caused by the presence of metals:

• Iron: red, green or brown
• Copper: Blue-green
• Manganese: Black or brown
• Calcium: Whitish

Utilization

Utilization

In the initial treatment, it will be necessary to apply 300 mL of the product for every 50 m³ of water to be treated. In the periodic treatment, only 100 mL per 50 m³ of water should be added.

Composition

Composition

Nitrilotrimethylentriphosphonic acid

Description

Description

Solid, organic compound with slow dissolution, based on bromine, formulated for cleaning and disinfecting swimming pools and spas.

Utilization

Utilization

Adjust the pH, after adjustment, dose the SPC PRO BROMO in order to obtain the desired residual bromine level. The product can be applied manually, in a dispenser or in the skimmer. The recommended levels of residual bromine are:

• Private pools 1 - 3 ppm
• Private Spas 2 - 4 ppm
• Public swimming pools 3 - 5 ppm
• Public Spas 4 - 6 ppm

Composition

Composition

Bromochloro-5,5-dimethylimidazolidine-2,4-dione

Description

Description

Solid compound, granulated disinfectant based on active oxygen. Chlorine free. Suitable for disinfecting and maintaining swimming pool water, eliminating chloramines and their irritating odors. Restores transparency and crystallinity.

Utilization

Utilization

In the absence of bathers, place the necessary dose in the dispenser or skimmer; initial treatment 20g of product for every 10 m³ of water. Maintenance treatment 10g of product per 10 m³ of water, weekly.

Composition

Composition

Pentapotassium bis(peroxymonosulfate) bis(sulfate)

Description

Description

Solid, organic compound with rapid dissolution, highly stabilized and with at least 55% useful chlorine content, for the treatment of swimming pool water. Due to its high solubility in water, the required amount of residual chlorine is quickly obtained. It does not change the pH of the water.

Utilization

Utilization

Introduce the required dose inside a skimmer or dispenser, and then put the filter equipment to work, for the product to dissolve, by circulating the water through the skimmer or dispenser. Initial treatment, add 15 g of product for every m³ of water, after 2 hours adjust the pH. Maintenance treatment add between 1.5 to 3 g/m³ of product daily.

Composition

Composition

Sodium Troclosene, Dihydrate

Description

Description

Sodium hypochlorite aqueous solution for water treatment in cooling circuits and industrial processes. The free residual chlorine should be between 0.5-2mg/L (ppm), a value that can be easily measured using a chlorine and pH analyzer kit. This control must be carried out at least 2 times a day.

Utilization

Utilization

Introduce the necessary dose of the product through the return pipe to the pool, with the aid of proper dosing equipment, keeping the water circulation in operation. Initial treatment, add 2-3 L for every 100 m³, wait 2 hours for the treatment and adjust the pH. Maintenance treatment, add 2-3 L for every 100 m³ throughout the day, preferably with the help of an automatic dispenser.

Composition

Composition

Sodium hypochlorite

Description

Description

Solid compound, based on stabilized chlorine in grains, of slow dissolution, to treat pool water as a disinfectant, keeping it crystalline and hygienically pure, without altering the pH.

Utilization

Utilization

Add 5 to 10 grams per m³ per day, dilute the chlorine in water and distribute it evenly throughout the pool. It is recommended that the pH of the water be within the parameters 7.2-7.6 and the chlorine content between 0.5 and 1.5 g/L(ppm).

Composition

Composition

Synclosene

Description

Description

Solid compound, based on chlorine stabilized in 200 g tablets, of slow dissolution, to treat pool water as a disinfectant, keeping it crystalline and hygienically pure, without altering the pH.

Utilization

Utilization

Add 600 to 1000 g for every 50 m³ of water to maintain correct chlorination for approximately one week. Place the tablets in the skimmers evenly. It is recommended that the pH of the water be within the parameters 7.2-7.6 and the chlorine content between 0.5 and 1.5 g/L(ppm).

Composition

Composition

Synclosene, boric acid

Description

Description

Solid compound, in tablets, formulated so that with its application in water it is possible to eliminate bacteria, viruses and micro-organisms in general, prevent the development of algae and keep the water crystal clear. Solid compound with 3 actions (disinfectant, pH and flocculant), formulated to eliminate bacteria, viruses and microorganisms in a single application, prevent algae and maintain crystal clear water.

Utilization

Utilization

Insert the tablets inside the skimmers, starting the filtration equipment, so that the product dissolves through the circulation of water. It is essential that the entire volume of water in the pool is recirculated daily through the filter.

Composition

Composition

Synclosene, aluminum sulfate

Description

Description

Solid compound, in tablets, formulated to eliminate bacteria, viruses and micro-organisms in general with its application in water, prevent the development of algae and keep the water crystal clear.

Utilization

Utilization

Insert the tablets inside the skimmers 400-600 g for every 50 m³, putting the filtration equipment into operation, so that the product is dissolved through the circulation of water. It is essential that the entire volume of water in the pool is recirculated daily through the filter.

Composition

Composition

Synclosene, aluminum sulfate, copper sulfate

Description

Description

Solid compound, in tablets, formulated to eliminate bacteria, viruses and micro-organisms in general with its application in water, prevent the development of algae and keep the water crystal clear.

Utilization

Utilization

Insert the tablets inside the skimmers 400-600 g for every 50 m3, putting the filtration equipment into operation, so that the product is dissolved through the circulation of water. It is essential that the entire volume of water in the pool is recirculated daily through the filter

Composition

Composition

Synclosene, aluminum sulfate, copper sulfate

Description

Description

Fast-acting compound, formulated on the basis of surface-active products with a high bactericidal, algaecidal and fungicidal power, intended to prevent the formation and development of algae in the pool water.

Utilization

Utilization

Liquid SPC Pro AlgiFirst is a product specially formulated for dosing in swimming pool waters that have automatic equipment. If there is no dosing equipment, the product must be dissolved in a container with water and then applied evenly. Initial treatment, directly add 2 L for every 100 m³ of water. Maintenance treatment, add 1 L of water for every 100 m³ of water once a week.

Composition

Composition

N,N-Dimethyl-2-hydroxypropyl ammonium chloride polymer

Description

Description

High-spectrum algaecide compound for the sanitation and conservation of swimming pool water. Eliminates all types of microalgae and bacteria present in the water.

Utilization

Utilization

Product specially formulated for dosing in the water of swimming pools that have automatic equipment. If there is no dosing equipment, the product must be dissolved in a container with water and then applied evenly. Initial treatment, directly add 2 L for every 100 m³ of water. Maintenance treatment, add 1 L of water for every 100 m³ of water once a week.

Composition

Composition

N,N-Dimethyl-2-hydroxypropyl ammonium chloride polymer

Description

Description

Fast-acting compound, formulated on the basis of surfactant products with a high bactericidal, algaecidal and fungicidal power, intended to prevent the formation and development of algae in the pool water.

Utilization

Utilization

Product specially formulated to be dissolved in a container with water and then applied evenly. Initial treatment, directly add 2 L for every 100 m³ of water. Maintenance treatment, add 0.5 L for every 100 m³ of water once a week.

Composition

Composition

Quaternary ammonium compounds, benzyl-C12-16-alkyldimethyl, chlorides

Description

Description

Fast-acting super-concentrated product that prevents the development of algae and has a bactericidal effect.

Utilization

Utilization

Apply the product near the inlets with the filtration equipment running. For initial treatments apply 160 ml per 50m³. For maintenance doses 40 ml per 50m³.

Composition

Composition

N,N-Dimethyl-2-hydroxypropyl ammonium chloride polymer

Description

Description

Algaecide product for swimming pool water treatment. Product prevents the development of algae, has a bactericidal effect. Product specially developed for water treatment with black and brown algae.

Utilization

Utilization

Apply the product near the inlets with the filtration equipment running. For initial treatments apply 500 ml per 10m³. For maintenance doses 250 ml per 10m³.

Composition

Composition

N,N-Dimethyl-2-hydroxypropyl ammonium chloride polymer, 1,2-Ethanodiamine, N,N,N',N'-tetramethyl-, polymer with 1,1'-oxybis(2-choroethane)

Description

Description

Algaecide product for swimming pool water treatment. SPC PRO Algipower Invernada prevents the development of algae and bacteria.

Utilization

Utilization

A shock treatment should be carried out and the next day add 2.5-3L of AlgiPower Invernada product per 50m³ of water. Repeat the treatment every 2 months in winter. Do not use in water in poor condition.

Composition

Composition

Polymer of N,N-dimethyl-2-hydroxypropyl ammonium chloride, sulfuric acid and aluminum sulfate

Description

Description

Compound intended to prolong the disinfecting action of chlorine in swimming pool water. Prevents the rapid destruction of chlorine caused by the sun's ultraviolet rays.

Utilization

Utilization

With the filtration equipment in operation, introduce the dose of SPC Pro Chlorine Stabilizer inside the skimmers or in the pre-filter of the pump. At the beginning of the season, add 4 kg of SPC PRO Chlorine Stabilizer for every 100 m³ of water. Keep an amount between 30-75 ppm of product in water. The concentration of this should not exceed 75 ppm. Once this concentration is exceeded, part of the pool water must be emptied, replacing it with new water that does not contain stabilizer.

Composition

Composition

Cyanuric acid

Description

Description

Product intended for the elimination of excess chlorine or residual bromine that may be in the pool water.

Utilization

Utilization

Dissolve the required dose of product in a container with water, 100 g of SPC PRO Chlorine Neutralizer to reduce the residual chlorine of 100 m³ of water by approximately 0.5 ppm. Distribute this solution evenly over the pool surface.

Composition

Composition

Sodium sulfite

Description

Description

Liquid product formulated to degrease swimming pool surfaces, walls and floors.

Utilization

Utilization

Wet the surfaces to be treated with the degreaser and leave for a few minutes. Clean with a sponge or soft brush and rinse thoroughly. If necessary, repeat the operation.

Composition

Composition

Propan-2-ol, Sodium Hydroxide

Description

Description

Liquid product formulated to eliminate various incrustations that appear on surfaces, walls and pool bottoms.

Utilization

Utilization

Wet the surfaces to be treated with the descaling agent using a long-handled brush to avoid direct contact with the product. Leave it on for 5-10 minutes and then rinse thoroughly with water until completely removed.

Composition

Composition

Hydrochloric acid

Description

Description

SPC PRO Descaler for Filters is an easy-to-apply product suitable for cleaning pool filters, made of stainless steel or polyester whose filtering load is flint or sand. Eliminates incrustations and degreases the filter without generating foam.

Utilization

Utilization

With the filter stopped and uncovered, drain all the water inside the filter through the bottom valve. Close the drain and, through the filter mouth, introduce 2 Lt of water followed by 2 Lt of SPC PRO Filter descaling agent for every 10 kg of sand or flint approximately. The added dissolution level must cover the sand level, at least between 20 and 30 cm above. Allow the product to react with the calcium oxide and dirt present in the filter. When the effervescence (bubbles) has ended, after a reasonable period of time (approximately 4 to 8 hours), close the filter cover, and placing the key in the cleaning position, run the water inside to wash it.

Composition

Composition

Nitric acid, phosphoric acid in solution

Description

Description

Solid, chlorine-free disinfectant product to eliminate chloramines and their irritating odors from pool water. Effective in eliminating Pseudomonas aeruginosa. Restores transparency and crystallinity. Treatment independent of water pH. It does not change its hardness.

Utilization

Utilization

Spread the required dose of SPC PRO Cloramin Shock over the entire surface. Add 10 g of SPC PRO Cloramin Shock for every m3 of water. It is recommended to carry out a shock treatment every 20 days or when there is a lack of transparency in the water.

Composition

Composition

Pentapotassium bis(peroxymonosulfate) bis(sulfate)

Description

Description

Liquid compound, based on concentrated flocculant, capable of eliminating colloidal particles found in the pool water.

Utilization

Utilization

With the filtration equipment stopped and without the presence of bathers in the pool, add 10 ml of SPC PRO Flocculant Liquid, for each m³ of water. Pour the required dose of SPC PRO Flocculant Liquid into a container with water and distribute this solution evenly over the surface of the pool. After about 8 hours, pick up and remove the floccule layer deposited on the bottom of the pool. In the maintenance treatment, just add 0.5 ml to the water for every 1 m³ of circulating water.

Composition

Composition

Aluminum chloride hydroxide sulfate (pH>2)

Description

Description

Product with coagulant and flocculating action, capable of eliminating suspended (or colloidal) particles, improving the transparency of the pool water. The slow and controlled dissolution of the flocculant allows, during the filtration process, a continuous clarification of the pool water, remaining crystal clear.

Utilization

Utilization

Place 100 g of product for every 50 m³ of water in the skimmer or pre-filter of the pump, having previously washed the filter. Repeat the operation every 10-15 days, or less if the water is cloudy.

Composition

Composition

Aluminum sulfate

What for

What for

Dry sea salt with very low levels of impurities suitable for use in domestic, private and public pools.

Composition

Composition

Sodium Chloride NaCl

How to use

How to use

In the pools, add directly to the vessel, preferably in an area where there is passage of water in order to provide greater speed in dissolution.

What for

What for

Dry sea salt with a very low level of impurities suitable for domestic, commercial and industrial descaling.
Use also possible in domestic, private and public pools.

Composition

Composition

Sodium Chloride NaCl

How to use

How to use

Use directly in the brine tank and keep the salt level at 40-50%. Observe the equipment instructions.
In the pools, add directly to the vessel, preferably in an area where there is passage of water in order to provide greater speed in dissolution.

Description

Description

Peristaltic Dosing Pump with proportional control of pH and Chlorine (REDOX).

Technical characteristics

Technical characteristics

Equipped with level probe, password security system, backlit digital display, Touch keyboard and IP65 Noryl housing.

Information

Information

Kit supplied with level probe, PE injection tube, PVC suction tube, filter and suction and injection valve in Viton, pH or RX probe with 4.5m cable, in-line probe port, buffer solutions, valve 1/ 2” 4x6 V and 2 sockets in load 1/2”.

Description

Description

Membrane Dosing Pump with proportional control of pH and Chlorine (REDOX).

Technical characteristics

Technical characteristics

Equipped with input for level probe, pH/Rx probe, flow sensor; password security system; purge system; PVDF body and PTFE diaphragm, ball pump body check valves; maximum of 180 pulses per minute; backlit digital display, touchpad IP65 housing in Noryl.

Information

Information

Kit supplied with level probe, PE injection tube, PVC suction tube, filter and suction and injection valve in Viton, pH or RX probe with 4.5m cable.
This product features two models:

• VMS PO 07.06 6L/h 7Bar
• VMS PO 10.04 4L/h 10Bar

Description

Description

Membrane Dosing Pump with Constant or Proportional Multiple Operation in different modes (Constant, Divisible, Multiplier, Percentage, PPM, BATCH, VOLT, MA, MLQ).

Technical characteristics

Technical characteristics

Equipped with input for level probe, pH/Rx probe, flow sensor; password security system; purge system; PVDF body and PTFE diaphragm, Ball Pump body check valves; maximum of 180 Pulses per Minute; Backlit digital display, Touchpad IP65 housing in Noryl.

Information

Information

Kit supplied with Level Probe, PE Injection Tube, PVC Suction Tube, Filter and Viton Suction and Injection Valve.This product features two models:

• VMS MF 07.06 6L/h 7Bar
• VMS MF 10.04 4L/h 10Bar

Description

Description

Digital Proportional pH and Chlorine Controller (REDOX) Compact with Peristaltic Dosing Pumps.

Technical characteristics

Technical characteristics

Equipped with level probe and flow sensor, password security system, backlit digital display, touch keyboard and IP65 box in Noryl.

Information

Information

Kit supplied with Level Probe, PE Injection Tubes, PVC Suction Tubes, Filter and Suction and Injection Valves in Viton, pH or RX Probe with 4.5m Cable, In-Line Probe Holder, Buffer Solutions, Valve 1/ 2” 4x6 V and 2 Load Sockets 1/2”.

Description

Description

Digital Proportional pH and Chlorine Controller (REDOX) Compact with Peristaltic Dosing Pump and 220Vac Output.

Technical characteristics

Technical characteristics

Equipped with level probe and flow sensor, password security system, backlit digital display, touch keyboard and IP65 box in Noryl.

Information

Information

Kit supplied with Level Probe, PE Injection Tubes, PVC Suction Tubes, Filter and Suction and Injection Valves in Viton, pH or RX Probe with 4.5m Cable, In-Line Probe Holder, Buffer Solutions, Valve 1/ 2” 4x6 V and 2 1/2 Load Sockets. Prepared for Binding to Saline Chlorinators.

FEATURES

FEATURES

Flexible hose with rigid spiral, manufactured using a special antishock additive that provides excellent crush resistance.

hidroflex has accurate external diameters for easy assembly of fittings.

The inside smooth inner layer providing efficient water flowing (an important hygiene factor).

hidroflex is certified according to the standard ISO 3994:2007, type 2.

APPLICATIONS

APPLICATIONS

The hidroflex successfully replaces rigid tubing for supply and circulation of water for swimming pool and hydromassage tubs.

TEMPERATURE RANGE

-5/+50°C

PRESENTATION

PRESENTATION

Colour:

Swimming pool hidroflex: white or grey.

Hydromassage hidroflex: white.

Available in coils of 25 and 50 metres, depending on the diameters.

Note: other colours, diameters and lengths available upon request.

FEATURES

FEATURES

Flexible hose with rigid spiral, manufactured using a special antishock additive that provides excellent crush resistance.

hidroflex has accurate external diameters for easy assembly of fittings.

The inside smooth inner layer providing efficient water flowing (an important hygiene factor).

APPLICATIONS

APPLICATIONS

MORE RESISTANT TO CHLORINE (Comparatively to the current solutions on the market).

The hidroflex successfully replaces rigid tubing for supply and circulation of water for swimming pool.

hidroflex is certified according to the standard ISO 3994:2007, type 2.

TEMPERATURE RANGE

-5/+50°C

PRESENTATION

PRESENTATION

Colour: Exterior White Interior Blue.

Available in coils of 25 and 50 metres, depending on the diameters.

Note: other colors, diameters, and lengths available upon request.